We have taken Kodiaks 2/RCM-10-DAC-SS and added (2) Galvanized 3,500lb Hubs with Bearings and Seals to the listing to give you new replacement hubs to install your disc brake kit. This particular kit is uses the Slip on style Brake Rotor which slides over the 5 Lug, 5 on 4 1/2 Bolt Pattern on the idler hub and secures when the lug nuts are tightened on the wheel. In order to use the slip over style rotor you will need to have 14" trailer wheels. The overall diameter of this rotor is too large to fit into the back of a 13" wheel. For 13" Wheels, check out the Integral Style 3500lb Brake Kits as they are ideal for this wheel size.
This Kit combines both Stainless Steel components and dacromet components. Kodiaks Stainless Calipers also include a stainless steel piston, stainless steel backed brake pads, and brass fittings. Every component on this caliper is designed to perform well in marine environments. Mounting Slip Over rotors to your hub will increase your axles overall length by a 1/2". This means that on a tandem axle set up, if only using brakes on one axle, that brake axle would be slightly longer
(1/4" on each side). This does not negatively impact your towing performance.
This Brake Kit Mounts on your Trailer Axles standard 4 Hole Brake Flange and accommodates standard #84 tapered Spindle that measures 1 3/8" x 1 1/6" with a 1.72" Seal Surface.
This is Kodiaks Part #2/RCM-10-DAC-SS and we include Hubs
This Kit Includes (2) Kodiak 225 Stainless Steel Calipers with Stainless Steel Backed Brake Pads, (4) Kodiak Stainless Steel Slide Guide Caliper Bolts, (2) Dacromet Slip On Caliper Mounting Brackets, (2) Dacromet 5 Lug Slip Over Vented rotors, (2) Galvanized 5 Lug idler Hubs, (2) 1 3/8" 68149 Trailer Bearings, (2) 1 1/16" 44649 Trailer Bearings, and (2) UHI Grease Seals 1.72" ID
When Doing This Project: