Boat Trailer Hub Galvanized 5 Lug with Bearings fits 3500 lb. Axles

Price: $42.56

Hub Galvanized 5 Bolt fits 3500 lb. Axles, 5 on 4 1/2in Bolt Pattern, 1 1/16in x 1 3/8in Bearings

Part Number: 25816

Availability: Ships Same Day Before 4PM EST!

Item Sku: 100165

Add Ons

(5) Zinc Plated Lug Nuts (+$4.15) (5) Stainless Steel Long Lug Nut (+$25.60) 1.98 AL Dust Cap (+$3.09)

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Description
Product Diagram
California Prop 65

This Galvanized Trailer Hub fits standard 3,500lb Trailer Axles. The Standard 3,500lb Trailer Spindle is referred to as a #84 Spindle and uses Bearings with Inner Diameter 1 3/8" and 1 1/16". We sell this hub as a complement to your trailers 5 Lug Slip on Disc Brake Kit in the 3,500lb 10" Rotor Size, or for your second axle that is not using Brakes. The Lug pattern on this Hub is a 5 Lug, 5 on 4 1/2 Bolt Pattern. This is an industry standard lug pattern that is present in all trailers wheels up to the 15" Trailer wheels size. This is by far the most common, but always double check your lug pattern measurement before ordering to ensure you get the correct Lug pattern as Kodiak Brakes will not accommodate the less common lug patterns.

Fits 3,500 lb #84 Painted Steel and Galvanized Boat Trailer Axles

Includes Hub with Pre-Installed Races, Bearings, and Grease Seal

Outer Bearing number 44649 with a 1 1/16 inch inner diameter

Inner Bearing number 68149 with a 1 3/8 inch inner diameter

Bolt pattern is 5 on 4.5

Rated to 1750 lbs each to mount on your 3,500lb Capacity Trailer Axle

When Doing this Project:

You may need to Select the Correct Dust Cap for this Hub, you need a 1.98 Size. The Type of Grease/Dust Cap depends upon the method you use for Greasing your Bearings. Of course you will need Trailer Hub Bearing Grease when repacking your bearings. We carry Kendall Lubricants, a top name in the industry of lubricating greases and a guaranteed long lasting moisture proof and high temperature wheel bearing grease for your outfit.

For a Plain Dust Cap, which means you hand-pack your bearings and then simply cover the opening until you desire to re-pack them again by hand, select 1.98 Dust Cap Fits Most 4 Lug and 5 Lug Trailer Hubs.

For an Accu-Lube or Posi-Lube Greasing System, meaning you hand-packed your bearings for installation, then use a Grease fitting installed in the tip of your spindle for re-greasing, use 1.98 Accu-Lube Dust Cap, EZ Lube Fits Most 4 Lug and 5 Lug Trailer Hubs.

For a Trailer Buddy, meaning you hand packed your bearings, then use the Trailer Buddy to add grease, and keep pressure on the Bearing chamber to assist in keeping water out, choose Boat Trailer Bearing Buddy 1.980 Stainless Steel Most 4 & 5 Bolt Hubs.

For the Correct Lug nuts, choose from any of the Trailer Lug Nuts in this category.

Boat Trailer Hub Galvanized 5 Lug with Bearings fits 3500 lb. Axles

Choose Options and Quantity